Physics · Courses in this subjectExpandCollapse

Movable incline: why is the block’s path steeper?

PhysicsSuggested ages: 15–18

Why does a block on a 30° incline follow a different angle relative to the ground?

Let a spring-loaded wedge slide freely and compare the block’s motion relative to the wedge and ground. Explain the path using horizontal momentum conservation, then inspect energy exchange in simple harmonic motion.

Learning goals

  • Distinguish displacement relative to the wedge from displacement in the ground frame.
  • Explain opposite horizontal motions using horizontal momentum conservation.
  • Derive the path relation tan β = (M + m) tan α / M.
  • Connect equilibrium, the oscillation period, and energy exchange in the system.

Before you begin

  • Resolve displacement and velocity into components and identify a reference frame.
  • Know Newton’s second law, horizontal momentum conservation, and Hooke’s law.
  • Understand equilibrium, amplitude, and period in simple harmonic motion.

A spring oscillator on a movable incline

A spring oscillator on a movable inclineA spring oscillator viewed from the ground. The green wedge translates horizontally, the orange block slides relative to it, and the blue dashed line is the block’s straight ground-frame path. M = 2m α = 30° m

Drag the orange block or blue path. Focus the block to move it with arrow keys.

Wedge displacement ΔX: -0.087 m

Paused. Drag the block or progress control to compare any instant.

m = 1 kg · k = 20 N/m · g = 9.8 m/s² · amplitude A = 0.30 m

Ground-path angle β
β ≈ 40.89°
Period T
1.217 s
Effective mass μ
0.750 kg
Total horizontal momentum
0.000 kg·m/s
Current normal force N
9.642 N

System kinetic energy K0.000 J

Potential above equilibrium U0.900 J

Total oscillation energy0.900 J

U = ½kq² is the increase in combined spring and gravitational potential above equilibrium, not spring energy alone. K includes both objects in the ground frame.

Read the diagram

  • Green triangle: wedge M, constrained to horizontal translation.
  • Orange block: mass m, oscillating relative to the incline under the spring force.
  • Blue dashed line: the block’s ground-frame path; β is measured from the horizontal.

The frame is fixed to the ground, with right and up positive. The system is released from rest, so total horizontal momentum is zero. The lower scale shows wedge displacement ΔX from equilibrium.

Start with α = 30° and M/m = 2. Drag between the endpoints and explain why the path is steeper than the incline. Increase the mass ratio: the wedge moves less and β approaches α. Changing a parameter restarts at an endpoint.

One quick model check

1Released from rest on a frictionless floor, which quantity must be conserved?

Observe, then explain

Work through four steps. Each button moves the interactive model to the matching observation state.

  1. The green wedge has mass M and the orange block mass m. Both contacts are frictionless and the spring runs along the slope. Released from rest with no horizontal external force, Mv_wedge + mv_block,x = 0. Gravity and the ground’s normal force act vertically, so momentum conservation is restricted to the horizontal direction.

    Look for: Keep M/m = 2 and α = 30°, then play from the endpoint. Compare the horizontal motion of both objects.

  2. Take down the slope as positive and measure q from equilibrium. At q = 0 the spring is still stretched by mg sin α/k, balancing the component of gravity. Both objects reach their greatest speed; oscillation potential ½kq² is zero and system kinetic energy is maximal.

    Look for: Choose step two to inspect a quarter-cycle. Check K + U = 0.900 J and explain why U is not spring energy alone.

  3. For a relative downhill displacement Δs, the block falls by Δs sin α. The wedge shifts left, cancelling part of the horizontal motion. The ground-frame horizontal displacement is only M cos α Δs/(M + m), so tan β = (M + m) tan α/M. With M = 2m and α = 30°, tan β = √3/2 and β ≈ 40.89°.

    Look for: Compare 0% and 50% progress. Join the two positions along the blue dashed path and compare β with α.

  4. A heavier wedge shifts less for the same relative motion. As M/m grows, β approaches α and the period approaches the fixed-wedge result 2π√(m/k). At finite ratios, effective mass μ = m(M + m sin²α)/(M + m) is less than m, giving a shorter period 2π√(μ/k). This μ describes the whole system’s inertia for relative motion; the block’s actual mass has not changed.

    Look for: Predict first, then increase M/m from 2 to 6. Compare wedge displacement, path angle, and period.

Build an explanation

Connect two reference frames with coordinates

Let X be the wedge’s ground-frame position and s the distance down from the top. The block obeys x = X + s cos α and y = h − s sin α, apart from a fixed centre offset. Zero horizontal momentum gives (M + m)Ẋ + m ṡ cos α = 0. Integrating gives ΔX = −m cos α Δs/(M + m), hence the straight path. Nonzero initial horizontal momentum adds uniform drift, so this stationary path requires the stated initial condition.

Express the system energy using one coordinate

Substitute both ground-frame velocities into K = ½M Ẋ² + ½m(vx² + vy²). This becomes ½μq̇², where μ = m(M + m sin²α)/(M + m). Expanding spring and gravitational potential together and setting equilibrium to zero gives U = ½kq². Thus μq̈ = −kq and T = 2π√(μ/k). Initially M = 2m and α = 30°, so μ = 3m/4. At m = 1 kg and k = 20 N/m, T ≈ 1.217 s.

The normal force keeps the block on the incline

Newton’s law normal to the slope gives N = m(g cos α + Ẍ sin α). A diagram must not force contact at arbitrary amplitudes. Here M/m is limited to 1–6 and α to 15°–60°, with amplitude 0.30 m, natural spring length 0.55 m, and slope length 2.20 m. Normal force remains positive and the block stays within the slope throughout this domain. Separation, friction, spring mass, and deformation beyond Hooke’s law are excluded.

Printable worksheet

Understand the concept here, then work independently on the A4 sheets. Practice, calculations and investigation records are included together. Reference answers open only in the parent dialog.

Physics

Movable incline: why is the block’s path steeper?

Name: __________________Date: __________________
Lesson model reference (schematic, not to scale)

Why does a block on a 30° incline follow a different angle relative to the ground?

  1. Released from rest on a frictionless floor, which quantity must be conserved?

    A. The block’s horizontal momentum B. The system’s total horizontal momentum C. The system’s total vertical momentum

  2. For M = 2m and α = 30°, what is the block’s ground-path angle?

    A. 30° B. 60° C. 40.89°

  3. What is true as the system passes relative equilibrium q = 0?

    A. Kinetic energy is maximal and the spring remains stretched B. All velocities are zero C. The spring is at its natural length

  4. Keep m, k, and α fixed while making M very large. What do the path angle and period approach?

    A. β → 90°, T → 0 B. β → α, T → 2π√(m/k) C. β → 0, T → ∞

Lesson references

These standards and open textbooks are used only for fact-checking and concept mapping. The lesson writing, questions, graphics, and interaction are independently authored.

Curriculum mapping note

An advanced high-school extension combining reference frames, horizontal momentum, mechanical energy, and simple harmonic motion. mitty’s public animation highlights the path-angle question and attributes its problem theme to a Keio University examination. This lesson independently derives the model and authors the explanations, SVG, and questions without reusing the source diagram or video. OpenStax supports the underlying conservation and oscillation principles. This is enrichment after the prerequisites, not a claim of complete local curriculum coverage.