The Doppler effect: trace every wavefront
Why can a moving source crowd wavefronts ahead and spread them behind without changing the speed of sound?
Move a source rightward from Mach 0 to Mach 2, trace circular wavefronts from each emission position, and compare subsonic, sonic, and supersonic geometry.
Learning goals
- Distinguish a wavefront’s emission centre from the source’s current position.
- Explain subsonic wavelength changes with λfront = (c−v)/f and λback = (c+v)/f.
- Use ffront/f = 1/(1−M) and fback/f = 1/(1+M) only for stationary observers on the line of motion.
- Interpret sonic accumulation and the supersonic Mach cone geometrically, not as infinite or negative frequency.
Before you begin
- Understand frequency, period, wavelength, and c = fλ.
- Read position–time relationships and know that Mach number M = v/c.
Interactive Doppler wavefront experiment
- Emission centre
- Current source
Teaching setting: c = 340 m/s. The 1–8 Hz setting controls schematic wavefront spacing; it is not a realistic audible pitch. Circles are geometric fronts, not pressure, and the Mach cone is an envelope. Emission begins at t = 0.
One quick model check
Observe, then explain
Work through four steps. Each button moves the interactive model to the matching observation state.
-
At M = 0 every emission has the same centre. Every circle expands at the same c = 340 m/s, so adjacent wavefront spacing is equal on both sides.
Look for: Choose Stationary and compare the source position with every emission centre.
-
At M = 0.5 the source moves right between emissions, while old fronts keep expanding about old positions. On axis, the forward wavelength becomes 0.5 of the stationary value and the rear wavelength becomes 1.5 times it.
Look for: Verify ratios 2.00 ahead and 0.67 behind, and state the observer conditions.
-
At M = 1 the source keeps pace with every right-moving front edge, so fronts accumulate at the source. The subsonic axial formula reaches its boundary here; the model does not report “infinite frequency”.
Look for: Choose Sonic, observe the common tangent point, and confirm that ratio readouts become a boundary note.
-
At M = 2 the source outruns earlier fronts. Their geometric envelope forms a Mach cone with half-angle μ = sin⁻¹(1/M) = 30°; it does not depict real shock strength.
Look for: Choose Supersonic, verify 30° in the readout, then find where the cone lines are tangent to circular fronts.
Build an explanation
Each front keeps its emission centre
In a stationary uniform medium, a sound pulse spreads from its emission point at c in every direction. Later source motion does not drag the old centre along. Circle centres advance along the path, while the current source is usually to their right.
The subsonic axial Doppler relation
Successive emissions are T = 1/f apart. The source moves vT in that interval, giving wavelengths (c−v)T ahead and (c+v)T behind. A stationary axial observer uses fobs = c/λ to obtain 1/(1−M) and 1/(1+M). A moving or off-axis observer needs a different relation.
Mach 1 is not an ordinary substitution
As M approaches 1 from below, forward wavelength tends to zero in the ideal continuous model, signalling the limit of the linear, lossless approximation. Continuing the same fraction at or above Mach 1 creates infinite or negative “heard frequencies” with no useful meaning here.
The Mach cone is an optional geometric extension
For a supersonic source, circles emitted over a finite past share two tangent lines. A right triangle gives sin μ = ct/(vt) = 1/M. Real sonic booms involve three-dimensional spheres, nonlinear compression, body shape, and atmospheric conditions beyond this diagram.
Printable worksheet
Understand the concept here, then work independently on the A4 sheets. Practice, calculations and investigation records are included together. Reference answers open only in the parent dialog.
Physics
The Doppler effect: trace every wavefront
Why can a moving source crowd wavefronts ahead and spread them behind without changing the speed of sound?
- A moving source continues right after emitting a front. Where is the old front’s centre?
A. At the emission position B. Moving with the source C. At the observer
- At M = 0.5, what is fobs/f for a stationary axial observer ahead?
A. 0.5 B. 1.5 C. 2.0
- Why does this lesson not show “infinite heard frequency” at M = 1?
A. Sound speed becomes zero B. The subsonic formula reaches its boundary and the idealisation fails C. The source stops emitting
- What is the Mach-cone half-angle μ at M = 2?
A. 30° B. 45° C. 60°