The unit circle: understand sine and cosine
How can the position of one point on a circle tell us sin θ and cos θ?
Rotate a radius of length 1 and compare degrees, radians, and the point’s coordinates. Read cosine horizontally and sine vertically, then use quadrants to explain their signs.
Learning goals
- Read a unit-circle point as P = (cos θ, sin θ).
- Connect degrees to radians and recognise exact trigonometric values at common angles.
- Use quadrants to determine signs and distinguish signed coordinates from non-negative lengths.
- Explain sin² θ + cos² θ = 1 using x² + y² = 1, then apply the coordinates to a circle with another radius.
Before you begin
- Know Cartesian coordinates, the four quadrants, and the positive directions of the axes.
- Use the Pythagorean theorem and understand square roots and sine/cosine ratios in a right triangle.
Turn the unit circle and read the coordinates
Drag P or choose a direction in the diagram to turn the radius. With the diagram focused, use Left/Right for 1° steps and Home/End for 0°/360°.
Paused. Read the values or choose another angle.
Reduced motion is enabled. Use Advance 30°, the angle buttons or the slider to observe one state at a time.
- Radians
- θ = π/6 rad
- Horizontal coordinate x
- x = cos θ = √3/2
- Vertical coordinate y
- y = sin θ = 1/2
- Point on the circle
- P = (√3/2, 1/2)
Quadrant I: upper right, so cos θ > 0 and sin θ > 0.
Common angles show exact values. Other radian and coordinate values use ≈ and round to four decimal places.
(√3/2)² + (1/2)² = 1
Coordinates may be negative; their squares add to the radius squared. The identity uses full values, while displayed readings may be rounded.
What each line means
- Blue horizontal line: x = cos θ, the x-coordinate.
- Orange vertical line: y = sin θ, the y-coordinate.
- Green segment OP: radius r = 1, always a positive length.
- Grey dashed lines project P onto the axes; the pale grid helps compare positions.
What the picture shows: This circle has centre O and radius 1. Point P has horizontal coordinate cos θ and vertical coordinate sin θ; θ is measured anticlockwise from the positive x-axis.
Try this: Choose 30°, then 150°, and compare both coordinates; you can also drag P or the angle slider to watch it pass across the axes.
What to notice: At 30° and 150°, y is 1/2 at both positions, while x is √3/2 and −√3/2 respectively. Arrows show direction from the origin: leftward x and downward y are negative. A negative coordinate does not mean a negative length.
One quick model check
Observe, then explain
Work through four steps. Each button moves the interactive model to the matching observation state.
-
The unit circle is centred at O and has radius OP = 1. Measure θ anticlockwise from the positive x-axis. At 30° = π/6, P = (√3/2, 1/2), so cos θ = √3/2 and sin θ = 1/2. Dashed lines project the point onto the axes.
Look for: Choose 30°. Identify the horizontal coordinate first, then the vertical one. Use the colour key to avoid swapping them.
-
A quarter-turn is 90° = π/2. The point reaches (0, 1), so cos 90° = 0 and sin 90° = 1. A point on an axis does not belong to any quadrant.
Look for: Choose 90°, then compare 0°, 180°, 270°, and 360°. Which positions have a zero coordinate?
-
150° = 5π/6 lies in quadrant II. The point is above and left of O: P = (−√3/2, 1/2). Cosine is negative and sine is positive. The minus sign indicates a leftward coordinate; the horizontal segment still has positive length √3/2.
Look for: Compare 30° and 150°. Which coordinate stays the same, and which changes only its sign? Explain using left and right positions.
-
300° = 5π/3 lies in quadrant IV, with P = (1/2, −√3/2). Here cos² θ + sin² θ = 1/4 + 3/4 = 1. Changing the angle moves the point but keeps the radius at 1, so the squared-coordinate relationship always holds.
Look for: Choose 300°, explain the coordinate signs, then change the angle. Explain the squared sum using the circle equation rather than rounded readouts alone.
Build an explanation
Extend the right-triangle definition around the circle
In quadrant I, dropping a perpendicular to the x-axis forms a right triangle with hypotenuse 1. The adjacent-to-hypotenuse ratio is x/1, so cos θ = x; the opposite-to-hypotenuse ratio is y/1, so sin θ = y. Defining the values with signed coordinates extends them to all quadrants and the axes. At 45°, both coordinates are √2/2, not 1/2.
Radians connect a turn to arc length
An angle in radians is arc length divided by radius. On a unit circle, an angle of θ radians sweeps an arc of length θ. One full circumference is 2π, so 360° = 2π and 180° = π; multiply degrees by π/180 to convert them to radians. Both 0° and 360° end at (1, 0), but one indicates no turn and the other a completed turn.
Signs describe direction; the squared sum describes radius
From quadrants I to IV, the signs of (cos θ, sin θ) are (+,+), (−,+), (−,−), and (+,−). Dashed projections help read coordinates; they are not extra radii. Every point satisfies x² + y² = 1, giving sin² θ + cos² θ = 1. Here sin² θ means (sin θ)², not sin(θ²). The identity follows from the Pythagorean theorem and the unit-circle definition, rather than from checking a few angles.
Transfer: enlarge the radius to 4
Imagine a circle centred at the origin with radius 4. At 300°, measured anticlockwise from the positive x-axis, the unit circle gives (cos θ, sin θ) = (1/2, −√3/2). Multiply both coordinates by 4: P = (4 cos θ, 4 sin θ) = (2, −2√3). The point is below and right of the origin. Its vertical coordinate is negative, while its distance from the x-axis is 2√3. Changing radius does not change the sine or cosine of the angle.
Printable worksheet
Understand the concept here, then work independently on the A4 sheets. Practice, calculations and investigation records are included together. Reference answers open only in the parent dialog.
Mathematics
The unit circle: understand sine and cosine
How can the position of one point on a circle tell us sin θ and cos θ?
- On a unit circle, turn 30° anticlockwise from the positive x-axis. Given cos 30° = √3/2 and sin 30° = 1/2, which coordinates describe P?
A. (1/2, √3/2) B. (√3/2, 1/2) C. (√3, 1)
- Convert 150° to radians using 180° = π. Which exact value is correct?
A. π/6 B. 3π/2 C. 5π/6
- At 225°, a unit-circle point is (−√2/2, −√2/2). What is cos² 225° + sin² 225°?
A. 1 B. −1 C. 0
- A circle is centred at the origin with radius 4. Its radius turns 300° anticlockwise from the positive x-axis. Given cos 300° = 1/2 and sin 300° = −√3/2, what are the endpoint coordinates?
A. (1/2, −√3/2) B. (2, −2√3) C. (−2, 2√3)